您所在的位置:首页 > 师资队伍 > 教师详细信息返  回

    

   张品佳

  工作职位:清华大学 电机系 副教授 博士生导师
  研究方向:电气设备的在线监测及智能控制 机械储能系统  新能源系统的监测,运行及控制
  电网的动态监测及增容
  办公地址:北京市海淀区清华大学西主楼3区313-2室
  邮政编码:100084
  工作邮箱:pinjia.zhang@tsinghua.edu.cn
  电话: 010-62788629


现为清华大学电机系副教授,博士生导师。入选2014年国家青年千人计划。2006年本科毕业于清华大学电机系,后就读于美国佐治亚理工学院 (Georgia Institute of Technology), 2010年获博士学位。博士毕业后就职于通用电气全球研发中心总部(GE Global Research),任资深工程师兼项目经理。主要从事电气设备的在线监测、电机的设计和控制等在新能源,储能方面的研究和应用。获得2013年IEEE Industrial Electronics Society - Electrical Machines Committee最佳论文奖一等奖,2008年IEEE Power & Energy Society (PES)General Meeting Paper & Poster Contest 二等奖,在美国、中国、欧洲、德国、巴西等地已获得专利授权和申请共计40余项。

2015.07-清华大学电机系 副教授 博士生导师
2010.05-2015.07(美国)通用电气全球研发中心,资深工程师,项目经理
2006.08-2010.07(美国)佐治亚理工学院 获博士学位
2002.08-2006.07清华大学 电机工程及应用电子技术系 获本科学位


获IEEE工业电子学会电机分会2013 最佳论文一等奖
获通用电气(GE Global Research)2012年创新大奖(Innovation Award)
获通用电气(GE Global Research)2010 技术创新奖 (New Technology Award)
获国家留学基金管理委员会授予的2010年国家优秀自费留学生奖
获2008年IEEE Power & Energy Society General Meeting的论文大赛二等奖


IEEE Transaction on Industrial Electronics Guest Editor (客座编委)- special issue on “Condition Monitoring, Diagnosis, Prognosis, and Health Management for Wind Energy Conversion Systems”, 2014
IEEE Energy Conversion Congress & Exposition Topic chair 及 Session chair - Electrical Machines 2013, 2014, 2015
IEEE International Electric Machines & Drives 2015 Track co-chair - Rotating electrical machines
IEEE Industrial Application Society及IEEE Power Electronics Society的电机技术委员会委员 (Electrical Machines Committee)


1.Zhang, P.; Neti, P.; Salem, S., "Electrical Discharge and its Impact on Drivetrains of Wind Turbines," in Industry Applications, IEEE Transactions on , vol.PP, no.99, pp.1-1 (in press)
2.Pinjia Zhang; Neti, P., "Detection of Gearbox Bearing Defects Using Electrical Signature Analysis for Doubly Fed Wind Generators," in Industry Applications, IEEE Transactions on , vol.51, no.3, pp.2195-2200, May-June 2015
3.Pinjia Zhang; Younsi, K.; Neti, P., "A Novel Online Stator Ground-Wall Insulation Monitoring Scheme for Inverter-Fed AC Motors," in Industry Applications, IEEE Transactions on , vol.51, no.3, pp.2201-2207, May-June 2015
4.Pinjia Zhang; Yi Du; Habetler, T.G.; Bin Lu; , "A Nonintrusive Winding Heating Method for Induction Motor Using Soft Starter for Preventing Moisture Condensation," Industry Applications, IEEE Transactions on , vol.48, no.1, pp.117-123, Jan.-Feb. 2012
5.Cheng, S.; Du, Y.; Restrepo, J.; Zhang, P.; Habetler, T.; , "A Nonintrusive Thermal Monitoring Method for Induction Motors fed by Closed-loop Inverter Drives," Power Electronics, IEEE Transactions on , vol.PP, no.99, pp.1, 2012
6.Pinjia Zhang; Yi Du; Habetler, T.G.; Bin Lu; , "Magnetic Effects of DC Signal Injection on Induction Motors for Thermal Evaluation of Stator Windings," Industrial Electronics, IEEE Transactions on , vol.58, no.5, pp.1479-1489, May 2011
7.Cheng, S.; Zhang, P.; Habetler, T.G.; , "An Impedance Identification Approach to Sensitive Detection and Location of Stator Turn-to-Turn Faults in a Closed-Loop Multiple-Motor Drive," Industrial Electronics, IEEE Transactions on , vol.58, no.5, pp.1545-1554, May 2011
8.Pinjia Zhang; Yi Du; Habetler, T.G.; Bin Lu; , "A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors," Industry Applications, IEEE Transactions on , vol.47, no.1, pp.34-46, Jan.-Feb. 2011
9.Pinjia Zhang; Yi Du; Habetler, T.G.; Bin Lu; , "Improving Thermal Recovery Time for Soft-Starter-Connected AC Motors With Intermittent Periodic Duty Cycles," Industry Applications, IEEE Transactions on , vol.46, no.5, pp.1927-1935, Sept.-Oct. 2010
10.Pinjia Zhang; Yi Du; Habetler, T.G.; "A Transfer-Function-Based Thermal Model Reduction Study for Induction Machine Thermal Overload Protective Relays," Industry Applications, IEEE Transactions on , vol.46, no.5, pp.1919-1926, Sept.-Oct. 2010
11.Pinjia Zhang; Bin Lu; Habetler, T.G.; , "An Active Stator Temperature Estimation Technique for Thermal Protection of Inverter-Fed Induction Motors With Considerations of Impaired Cooling Detection," Industry Applications, IEEE Transactions on , vol.46, no.5, pp.1873-1881, Sept.-Oct. 2010
12.P. Zhang, Y. Du, B. Lu, and T. G. Habetler, “A DC Signal Injection based Thermal Protection Scheme for Soft-starter connected Induction Motors,” IEEE Trans. on Industrial Applications, vol. 45, pp. 1351-1358, 2009.
13.P. Zhang, Y. Du, J. Dai, T. G. Habetler, and B. Lu, “Impaired Cooling Condition Detection Using Dc Signal Injection For Soft-Starter-Connected Induction Motors,” IEEE Trans. on Industrial Electronics, vol.56, no.11, pp.4642-4650, Nov. 2009
14.P. Zhang, B. Lu, and T. G. Habetler, “A Remote and Sensorless Stator Winding Resistance Estimation Method for Thermal Protection of Soft-Starter-connected Induction Machines,” IEEE Trans. on Industrial Electronics, Vol. 55, no.10, pp.3611 – 3618, Oct. 2008